How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of specific steps to add an additional ignition key. This requires a handheld computer, called Tech-2 which is to be used by the dealer. Then a new key as well as transponder are required to be purchased and then programmed into the car.
Rotate your keys to prevent one from wearing out more than another. This will help keep your keys in pristine condition.
Replacement Case
In contrast to the traditional Saab keys of old keys, the latest key fobs have electronics inside which makes it hard to duplicate. This has made stealing cars much more difficult than twenty years ago. It has also made it more expensive to replace keys lost.
Every owner of a Saab 9-3 must have at a minimum two functioning keys. If one of them is lost, it costs a lot of money to get another one for the vehicle because it requires replacing the CIM module and reprogramming the locking cylinders. Dealers charge between $100 and $200 for this.
There are ways to avoid these costly costs. Some parts suppliers will use the code of the spare key to cut a brand new metal blade for a fraction of what the dealer charges. The key must be the exact same as the original for it to function in your vehicle.
Follow these steps to replace the case. You'll require a flathead screwdriver along with some patience. With the screwdriver, break away the plastic and take out the emergency key. Once you have the case open, take the electronics out and place them inside the new case. Make sure you insert the correct badge and key back inside the case, too.
Replacement Battery
The Saab 9-3 replacement battery is a cheap component that can be easily and quickly replaced. This YouTube video by Cyclone Cyd demonstrates how to replace the battery of the remote fob with just four steps. This tutorial can be used with any modern Saab key fob. However, the procedure may differ slightly.
The first step is to find the button that opens the backup key on the fob. This is usually located next to the Saab logo on the back of the fob. Then you will need the flathead screwdriver to insert into the tiny hole in this button. This should be sufficient to open the fob case so that you can change the battery.
After you have installed the new batteries CR1632, it is possible to put back together the remote key fob. Then, you can program it into your car. The whole process should not be more than an hour. It is a simple procedure that doesn't require any special equipment.
If you lose your key, the process will be a bit more involved but it is still able to be completed. The dealer needs to first determine the VIN of the vehicle and then order the replacement TWICE module as well as key blade with the proper unique code. The dealer will then have to program the key using MDI which is a new software tool.
saab replacement keys is a device that locks and unlocks your car. It is equipped with a battery within. Batteries have a finite lifespan and will eventually die. This is a problem that affects all cars, and the good news is that you can change the batteries in most key fobs without having to replace the entire case. Amazon sells fobs for replacement that already have all the electronics in place. You can simply remove the case and replace the batteries. You will need to remove the emergency key before you replace the batteries. To accomplish this, simply insert the screwdriver of a small flat head into the slot that is in the middle. The screwdriver should be moved around the case until it is split open, making it simple to take it out.
If you're ready to change your keys, keep a spare available. This can save you a lot of money. If you have spare keys, you can ask the dealer cut an entirely new key and then program it to your car, which is cheaper than replacing the entire key fob.
It is possible to add a second key to your car in the event that you don't have one, but it requires an extensive amount of research and work. Adding a second key costs around a hundred dollars and also requires programming of the car's computer. Professionals can accomplish this but it's not a cheap option.
Replacement Ignition
Unlike earlier Saab automobiles, the current SAAB 9-3 models are equipped with an upgraded alarm system that is dependent on a coded keys. If you lose only one key, it can be expensive to add another one since the car must have a special computer added and be programmed to accept a new key. Most locksmiths cannot do this and even dealers will charge hundred dollars to program the new key!
If you've lost your only working key, a dealer will repair the computer in your car (known as the CIM or SAAB TWICE) to make an exchange, and they will charge you the highest price for it. Instead, we can reprogram the EEPROM in your current car computer, preparing it for a new key, and save you over 50% of the price you be charged at a dealership.
If you've been a long-time owner of an 03-11 SAAB 9-3, then you probably know that the ignition key isn't the most robust. They can get extremely sticky and the buttons can fall off every now and then, so you should consider purchasing a new one if yours isn't working properly. Luckily, replacing the ignition key isn't as difficult as it sounds, and it can be done in a short time using the proper tools.